Home  

TRX Solar
Collector       Evacuated Tube Type
     Collector          Flat Plate Type
DHW System Components
Thermosyphon Type Water Heater
Evacuated Tubes
Cu-N/AL Selective Coating
Installation  Photos  
 

Co-Chance

Sun Cruiser Tracking System

System Components

 

PU Composite Boards

Specifications

 PU Duct Assembly

IP and Production

 

Alpheus A*PEX

PEX Tubing

Water Solutions

 

Others

Solar Electric Panels

Rechargeable Battery packs

 

Technical   Support

Engineering  Data

 

Insolation   Data

 

 

Contact Us

 

 

                                                                                                                    

            TRX Flat Plate Type Solar Collector
Collector Specifications Performance Curve    

              

 

 

 

Flat Plate Type Collector          

     

 

   Absorber assembly options

  • Cu  tubes and fins
  • Al   tubes and fins

   Selective coating options

  • Cu-N/Al PVD Coating
  • Black Chrome
  • Black Paint

   Standard sizes  : 

  • 1m x 2m
  • 4ft x 8 ft
  • 4 ft x 10ft

Cross-sectional view

 

    

 30 mm thick PU Insulation

 

Specifications

         

 

1 meter x 2 meter flat plate collector 

Item

specification

Overall the collector

          length

2003 mm

          width

1080 mm

height

76 mm

Frame

length

2000 mm

Width

1000 mm

absorber

length

1943 mm

width

951 mm

No of absorber fins

  8

transparent area

length

1943 mm

width

951 mm

PU foam insulation thickness

30 mm

collector weight

dry

42 kg

wet

45 kg

Fluid capacity

2.77 L

operating temperature range

 

Maximum flow rate

100  L/h

Recommended Flow Rate

60   L/h

Maximum Operating Pressure

0.6Mpa

 

48 ft  flat-plate collector                                                                    Go Top

Item

specification

Overall the collector

          length

2443mm

          width

1315mm

height

76mm

Frame

length

2440mm

width

1235mm

absorber

length

2383mm

width

1178mm

No of absorber fins

10

transparent area

length

2383mm

width

1178mm

PU foam insulation thickness

30mm

collector weight

dry

62Kg

wet

66Kg

Fluid capacity

3.63 L

operating temperature range

 

Maximum flow rate

150  L/h

Recommended Flow Rate

80   L/h

Maximum Operating Pressure

0.6Mpa

 

410 ft  flat-plate collector                                                                  Go Top

Item

specification

Overall the collector

          length

3053mm

          width

1315mm

height

76mm

Frame

length

3050mm

width

1235mm

absorber

length

2993mm

width

1178mm

No of absorber fins 10

transparent area

length

2993mm

width

1178mmPY

PU foam insulation thickness

30mm

collector weight

dry

78Kg

wet

83Kg

Fluid capacity

4.23 L

operating temperature range

 

Maximum flow rate

190  L/h

Recommended Flow Rate

110  L/h

Maximum Operating Pressure

0.6Mpa

Other sizes are available upon request.

 

                    Typical Performance Curve                                                                       

Go Top